'Removing as many weeds as possible from paved surfaces with hot water rather than brushing' |
|
| GARDEN AND PARK TECHNOLOGY |
|
|
|
|
 |
| 227 sec |
Municipality of Leusden brings weed control in-house
Leusden now controls weeds on paved surfaces using its own machinery and employees. Brushing is used for the initial heavy work, followed by hot water treatment for better results. The key is to respond to conditions on the ground as much as possible. According to the municipality, this is best achieved by managing the work in-house.
| Leusden is ready to put the Weedwinner to work. From left to right: Willem Hellinga, Johan Bruntink, machine operator Arjan van der Heijden and Johan Ossendrijver |
'We first need to clear a backlog,' says Johan Ossendrijver, public works operations coordinator at the municipality of Leusden. Weed control was previously outsourced, at least, he adds, when the municipal council was willing to allocate any money to it. As a result, particularly last year, maintenance was largely neglected. Weeds were given plenty of opportunity to spread. Recognising that it was better to change course than continue down the wrong path, the municipality decided to adopt a new approach this year. Ossendrijver assembled an in-house weed control team, which began tackling weeds on paved surfaces in January. Persistent species such as barnyard grass and common knotgrass had become firmly established. The combination of a weed brush and sweeper proved useful for this work. However, Ossendrijver sees brushing largely as a temporary measure. He prefers hot water treatment. Once the initial heavy work has been completed, he believes this is the best way to keep paved surfaces consistently tidy.
Sensor-controlled
The municipality purchased a Weedwinner for hot water weed control. This sensor-controlled hot water weed control machine has only recently entered the market and is intended to fill the gap left by the disappearance of the Heatweed brand. The people behind the new brand recognised that many existing hot water machines urgently need replacing. 'Many are already more than ten years old and have been used day in, day out throughout that period. As a result, they are becoming increasingly prone to breakdowns,' says Willem Hellinga of supplier DEM, who is visiting the municipality together with dealer Johan Bruntink. The Weedwinner arrived at exactly the right time for Leusden. The municipality purchased the first unit this summer and has therefore already been using it for some time. Alongside the purchase of the new machinery, a dedicated team was established. Operating a sensor-controlled hot water machine is a skilled job that requires both specialist training and personal judgement, Ossendrijver explains.
|
|
'We receive many compliments while working. One person was even so pleased that he brought cakes for the entire team'
| |
|
Arjan van der Heijden switched careers from baker to Weedwinner operator in Leusden. Instead of working through the night, he can now work during normal daytime hours, which he considers a major advantage. Unlike a contractor working to a fixed specification, he has the freedom to decide where his efforts are most needed at any given time and how to carry out the work. This freedom comes with additional responsibility, which makes the job both more attractive and more effective, he explains. 'I assess the condition of the area and decide what is best tackled first and what can wait. The right time also depends on how a location is used. I will tackle a school car park during the holidays because it will be empty. I visit shopping centres early in the morning when they are quiet. I only work on cycle paths when few pupils are travelling to or from school.'
Taking good care of the machinery
Ossendrijver is pleased to hear this. 'You can see that Arjan also takes good care of the machine,' he remarks. 'There is still not a single scratch on it.' He stresses that he would never allow just anyone to operate an expensive and advanced machine such as the Weedwinner. 'But when Arjan is on holiday, for example, the work must continue. For those periods, he has a designated colleague who we know also takes great care of the machine.' Operating the machine is a skill in itself, Ossendrijver explains. 'The operator has to pay attention to many things. Steering accurately while keeping a close eye on the spray bar, checking for overhanging branches and other obstacles, and watching the traffic. Looking up, down, ahead and sideways: two eyes are hardly enough. There is a good reason why the supplier offers specialist training. But training alone is not enough. You also need to have a natural aptitude for the job.' Slowly but surely, the municipality is reclaiming its streets from weeds. 'On some paths, the weeds had grown to such an extent that brushing and sweeping were insufficient. We even had to use a wheel loader. Ideally, in future we will return with the hot water machine a few weeks after brushing. That way, we can also reach part of the root system and tackle anything that has germinated again.'
|
|
'People appreciate greenery but also want paved surfaces to look well maintained'
| |
|
Compliments
The results are clearly being noticed, says Van der Heijden. 'We receive many compliments while working. One person was even so pleased that he brought cakes for the entire team.' Ossendrijver understands why. 'People appreciate greenery but also want paved surfaces to look well maintained.' Ossendrijver expects the weed brushing machine to remain necessary, but believes the Weedwinner can gradually take over most of the work. In his view, hot water offers several advantages over weed brushing. 'It also reaches part of the root system. Brushing is more like mowing. In the worst case, it actually stimulates growth rather than exhausting the plants until they eventually disappear.' Another important advantage of hot water, he says, is that it does not damage paved surfaces. It also removes green deposits, does not generate dust and reduces the risk of damage to the surroundings from flying stones. To make the investment financially worthwhile, the machine needs to be used as continuously as possible, he adds. 'We can only not use it during freezing conditions. With the mild winters we have experienced in recent years, there should be very little downtime. If we want to, we can probably continue working throughout much of the winter. We also have the flexibility to do that because we are now entirely responsible for managing the work ourselves.'
A cost-effective approach
Ossendrijver expects it will take several more years to clear the maintenance backlog completely. However, the aim is that consistent treatment will gradually exhaust the root systems of even the most persistent weeds growing on paved surfaces. The weed brushing machine will still have a role in certain locations. However, he would prefer most of the work to be carried out using the hot water weed control machine. His calculations have shown that maintaining paved surfaces in this way not only keeps them looking tidy but is also a relatively cost-effective approach.
This article was previously published on 30 October 2026 on the website of Stad + Groen.
| LOG IN
with your email address to respond.
|
|
|
| There are no comments yet. |
|
| |
Anyone can place small ads for free through their own account.
Place a free ad
|
|
|
|